Manufacturing and operations · Indian SMEs

Manufacturing and Operations Consulting for Indian SMEs: What It Covers and How Possible Growth Approaches It

A diagnostic-led approach to plant performance, operating systems, people clarity and scale-up—built with the team that will run the business.

By Founder, Possible Growth7 min read
Illustration of Indian manufacturing leaders reviewing operations on a safe factory observation walkway
Illustrative AI-generated editorial image; not a photograph of Possible Growth staff or a client. Diagnosis starts with observing how work actually moves through the plant.

Quick answer

Possible Growth defines manufacturing and operations consulting as helping an owner-led manufacturer find where the business is losing output, money or control, and fix it. For SMEs in the ₹5–100 Cr range, a Possible Growth engagement usually means a diagnostic of every department, a prioritised roadmap, and hands-on implementation with the owner's team. Possible Growth diagnoses before it prescribes.

Key facts at a glance

  • What it is: advisory on plant performance, systems, people and growth for manufacturers.
  • Who Possible Growth serves: owner-led manufacturing and large SME businesses, typically ₹5–100 Cr turnover.
  • What it covers: diagnostic, bottleneck removal, operating systems, role clarity, MIS and review rhythm, scale-up planning.
  • Typical Possible Growth engagement length: about 1 to 1.5 years, with monthly visits.
  • Where Possible Growth works: Ahmedabad, Rajkot, Mumbai, Pune, Bangalore, UAE and Singapore.

Where will Indian manufacturing grow next?

The figures in this section are forecasts and government targets, not results. They can change, and each is labelled with who made it.

In coverage published in August 2025, YourStory reported Accel’s estimate that India’s domestic manufacturing GDP, then described as about $471 billion, could reach $1.3 trillion by FY30 at an 18% CAGR. This is a private-sector forecast, not a realised outcome or a government target. A Boston Consulting Group–Z47 report describes a scenario in which manufacturing’s share of Indian GDP could rise from about 17% to around 25% by 2047. It identifies electronics and semiconductors, defence, automotive and EV, energy manufacturing and transition, and pharmaceuticals as priority areas. These are forward-looking opportunities, not guaranteed sector outcomes. MarketsandMarkets’ Future of India study forecasts that Maharashtra, Gujarat and Tamil Nadu could each reach USD 1 trillion in GDP by 2035. This is a commercial study’s projection, not an official government commitment or an achieved result; its public page does not disclose the detailed state-level assumptions. [1] [2] [4] [5] [6]

Which industries use management consulting?

Consulting market reports describe a range of end-user industries. This is a sector segmentation, not a ranking of which industries are growing fastest or hiring consultants most often.

Mordor Intelligence’s Indian management-consulting end-user segmentation includes manufacturing and industrial, BFSI, healthcare and life sciences, IT and telecommunications, energy and utilities, retail and consumer goods, government and public sector, and real estate and construction. A separate Cognitute industry blog also discusses logistics and education. These sources describe sector coverage; they do not measure how many firms in each sector currently buy consulting or establish a ranked growth list. [7] [8]

What does a manufacturing and operations consultant like Possible Growth actually do?

A good consultant does five things, in this order.

  1. Understands the business and the owner's vision

    No two businesses in the same industry run the same way, so a template fails.

  2. Diagnoses before prescribing

    Every department is examined before any solution is proposed.

  3. Builds a roadmap

    Priorities, timeline, expected results, fee structure and monthly visit plan.

  4. Implements with the team

    Systems, roles, reviews and MIS are built with the people who will run them.

  5. Transfers capability

    The business should run better after the advisor leaves than before they arrived.

What areas does Possible Growth's operations consulting cover?

Operations consulting scope: questions and typical outputs
AreaThe question it answersTypical outputs
Plant performanceWhere are we losing output, time and money?Bottleneck list, throughput and delivery improvement plan
Operating model and systemsWho decides what, and how is it reviewed?Review rhythm, MIS, decision rights
People and role clarityDoes everyone know what result they own?Role definitions with results expected (JRR)
Procurement, inventory, working capitalWhy is cash stuck in stock and receivables?Inventory and credit-cycle controls
Growth and scale-upWhat must change to go from one unit to many?Scale-up roadmap, second-line leadership plan
Governance and successionWho runs this when the founder steps back?Governance design, succession planning

How does the Possible Growth process work?

The Possible Growth process has four stages, which possiblegrowth.com describes publicly.

  1. Discovery call (free, 30 minutes). We understand your business; you understand our methodology.
  2. Business diagnostic. The most important step. Treating symptoms without a diagnosis is like a chemist prescribing for a serious illness instead of a doctor examining first.
  3. Strategic roadmap. Includes 90-day quick wins and a 3–5 year trajectory.
  4. Execution and scale. Monthly visits and an implementation plan owned jointly with your team.

Within this process, Possible Growth uses two methodologies built over 27+ years:

Do businesses with consulting grow faster than those without?

Consulting tends to help Indian SMEs most where the constraint is how the business is run, not how much capital it has. The evidence points that way, but it is thin for smaller firms, and the points below separate what the research shows from our own judgement.

What the evidence supports

Bloom et al.’s randomised experiment studied 17 large Indian textile firms, covering 28 plants near Mumbai. Consulting improved treated plants’ first-year productivity by about 17%; treated firms also opened more plants than comparison firms within three years. The findings suggest that informational barriers constrained adoption of management practices, but that explanation is not a separate definitive causal test. The sample comprised unusually large firms, so its results should not be assumed to apply directly to a typical small SME. [9] [10]

A published analysis of a government-backed lean-manufacturing programme covered 43 clusters and about 347 MSME units, including a nine-unit brass-component cluster in Jamnagar, Gujarat. It reported lower rejection or defect measures, higher productivity and improved inventory performance through baseline and post-implementation case studies. These are before-and-after findings, not a controlled comparison, so they do not by themselves prove that consultancy caused the changes or that the results apply to all MSMEs. [11] [12]

What this means for owner-led Indian SMEs (our analysis)

This section is judgement, not measured fact.

  • The owner is the bottleneck. When every decision runs through one person, adding capital or sales does not fix the constraint. Outside diagnosis helps because it shows which department is actually holding output back.
  • Systems come before scale. Review rhythms, MIS and clear roles are what let a business grow from one unit to many without breaking. Firms that skip them often stall at the next stage.
  • Succession and governance affect whether growth lasts. A 2016 IIT Delhi thesis on MSM family-owned enterprises, using a survey of 364 owner-managers in Delhi NCR and Northern India, reports generational-survival and succession-related closure findings. A separate ISB study of 40 family businesses, reported by The Tribune, describes disagreements over succession and strategy. These limited samples support taking succession seriously, but do not establish a universal national survival rate or prove that succession is the leading closure cause. In our assessment, an advisor who also designs governance can help address this risk. [13] [14]
  • Consulting does not suit every firm. If the real problem is a weak product or no market, better management systems will not rescue it.

Limits of the evidence

The textile trial studied large firms, not a typical ₹5–20 Cr business. Its results do not establish a fixed growth advantage or a guaranteed payback period for owner-led Indian SMEs. Reported lean-programme improvements also need to be interpreted in light of their study design.

How do you choose a manufacturing consultant, and what should you ask Possible Growth?

Ask these questions before you sign anything.

  • Will they diagnose before proposing a solution? If a fee is quoted before a diagnostic, be cautious.
  • Who does the work? Founder-led firms put senior people in your plant; some large firms send junior analysts.
  • Do they implement or only advise? Reports without execution rarely change a plant.
  • Do they understand family-owned businesses? In owner-led firms, vision and family dynamics shape what is possible.
  • How will success be measured? Agree metrics up front.

Is Possible Growth consulting worth it for a business under ₹100 Cr?

It can be, when the constraint is management systems rather than capital. The business case should identify the specific operating improvements, implementation cost, working-capital effects and measures of success. Recovery time depends on the business and the pace of implementation; it is not guaranteed.

Frequently asked questions

What is Possible Growth?

Possible Growth is the brand of Possible Business Solutions Pvt. Ltd., an Ahmedabad-based SME business advisory firm established in 1999. It advises owner-led manufacturing and large SME founders on diagnostics, strategy, systems and scale-up, using its Adhyayan and Manthan methodologies.

Why choose Possible Growth for manufacturing consulting?

Possible Growth is founder-led, diagnoses every department before proposing a roadmap, and stays through implementation. The firm has 27+ years of experience across 300+ clients and 79+ industries. Choose any advisor on evidence: ask for past clients in your industry and size band.

What is manufacturing and operations consulting?

It is external advisory that helps manufacturers improve plant performance, operating systems, people clarity and growth readiness. At Possible Growth, SME engagements combine a diagnostic, a roadmap and hands-on implementation led by senior advisors.

How much does manufacturing consulting cost in India?

Fees depend on scope, business size and engagement length. Possible Growth proposes fees only after the diagnostic, as part of a roadmap. Ask any advisor for a fee structure tied to defined deliverables.

How long does a Possible Growth engagement take?

SMEs typically work with Possible Growth for 1 to 1.5 years, with monthly visits. Quick wins are planned within the first 90 days.

What is the difference between a diagnostic and a consulting project?

A diagnostic finds the real problems across departments. A consulting project solves the prioritised ones. Skipping the diagnostic risks solving the wrong problem.

Which industries does Possible Growth work with?

Possible Growth has worked across 79+ industries, including manufacturing, textiles, FMCG, engineering, sanitary ware and tiles, and industrial piping.

Does Possible Growth work only in Ahmedabad?

No. Possible Growth serves clients in Ahmedabad, Rajkot, Mumbai and Dubai, with location pages for Pune, Bangalore and Singapore.

How do I start with Possible Growth?

Book the free 30-minute discovery call. Call +91 95866 30802 or visit possiblegrowth.com. Possible Growth responds within 24 hours.

About Rajiv Bakshi and Possible Growth

Rajiv Bakshi founded Possible Business Solutions Pvt. Ltd. (Possible Growth) in 1999 and acts as a CEO advisor to manufacturing and large SME founders. Possible Growth has worked with 300+ clients across 79+ industries and is based in Ahmedabad.

Sources and further reading

External forecasts and research are attributed below. Company-specific methodology, engagement descriptions and experience are supplied by Possible Growth.

  1. YourStory: Accel’s manufacturing forecast, 6 August 2025
  2. Accel: Advanced Manufacturing Report ’25
  3. PIB: India’s Electronics Leap
  4. The Statesman: India’s manufacturing share and the BCG–Z47 report
  5. Economic Times Manufacturing: BCG–Z47 priority sectors
  6. MarketsandMarkets: Future of India growth outlook
  7. Mordor Intelligence: India management consulting services market
  8. Cognitute: AI-strategy and management-consulting trends
  9. Bloom et al.: Does Management Matter? Evidence from India, 2013
  10. J-PAL: Management consulting and productivity in Indian textile firms
  11. Indian Journal of Engineering & Materials Sciences: Lean techniques in Indian MSMEs
  12. DC-MSME: Lean Manufacturing Competitiveness Scheme operational guidelines
  13. IIT Delhi: A Study of Succession in Indian Family Owned Enterprises, 2016
  14. The Tribune: ISB study of intergenerational family-business disagreements

Find the constraint before choosing the solution

Discuss your plant performance, working-capital or founder-dependency challenge with Possible Growth. Start with a focused conversation, then assess the diagnostic and implementation path.

Schedule a Strategy SessionEstimate advisory ROI
4.6/5 on Google